· Oxygen
sensor voltage in range from 350 mV to 550 mV for longer than
2.5 s (circuit interruption, oxygen sensor defective)
The trouble code is stored if
(conditions must be fulfilled consecutively):
l. ) Coolant temperature
higher than 70° C / 158° F
2. ) Condition l. )
fulfilled for 3 min
3. ) Load signal greater
than 1.7 ms
4. ) After conditions l. )
to 3. ) are fulfilled, waiting period of 5 s elapsed
5. ) Trouble code 73 or 74
not recognized
Replacement value:
The control unit takes a
replacement value of 450 mV.
The oxygen sensor control is
switched off.
|