Depress accelerator pedal briefly to full load stop (full
throttle)
INACTIVE
ACTIVE
INACTIVE
21, 22
-
Note: The control unit receives a voltage signal from
throttle valve potentiometer P34 via Ter. 26.
Within a certain voltage level range, the control
unit recognizes that the throttle valve is in the partial load position.
TECH 1 reads this information from the control unit.
Notes on Trouble - shooting:
Nominal Value:
Cause of Fault:
· Engine running
at idle speed. Disconnect plug from throttle valve potentiometer
INACTIVE
· Short circuit
between Ter. 3 and Ter. 1 in throttle valve potentiometer plug
· Lead
interruption from
- control unit Ter. 26 to throttle valve
potentiometer plug Ter. 3
- control unit Ter. 34 to throttle valve
potentiometer plug Ter. 2
- throttle valve potentiometer plug Ter. 1 to
ground