Conditions for Checking
|
Nominal Value
|
Affected Terminals: 53, 41
|
|
Possible Trouble Codes: 87, 88
|
|
Vehicles with AC:
|
|
This check can be performed in
two operating conditions: "ignition ON, engine off" and
"engine running at idle speed".
|
|
The first part of the check
should be carried out if the engine cannot be started:
otherwise the second part allows
accurate diagnosis.
|
|
Check 1:
|
|
Ignition ON
|
|
Engine OFF
|
|
AC switch ON
|
|
Press F5 in the system main
menu, select desired test with arrow keys and confirm with YES. Follow
instructions in the TECH 1 display.
|
The AC cutoff relay switches
alternately:
INACTIVE 12V
ACTIVE 0V
|
Note:
|
|
The AC cutoff relay is actuated
at a frequency of 0.5 Hz (actuation duration 1 s).
|
|
The check is completed after a
maximum of 30 s.
|
Noise check:
|
|
clicking noise from relay
|
Check 2:
|
|
Engine running at idle speed
|
|
AC switch ON
|
|
Press F5 in the system main
menu, select desired test with arrow keys and confirm with YES. Follow
instructions in the TECH 1 display.
|
The AC cutoff relay switches
alternately:
INACTIVE 12V
ACTIVE 0V
|
Note:
|
|
The AC cutoff relay is actuated
at a frequency of 0.5 Hz (actuation duration 1 s).
|
|
The check is completed after a
maximum of 30 s.
|
AC compressor switches ON and
OFF
(clicking noise from compressor
and from relay)
|