vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

TABLE 2, TROUBLE CODES - Trouble Code 39 O2 SENSOR CIRCUIT VOLTAGE HIGH > < TABLE 2, TROUBLE CODES - Trouble Code 13 O2 SENSOR OPEN CIRCUIT

Table 2, Trouble Code Table

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when

38

02 SENSOR

CIRCUIT VOLTAGE LOW

26, 27, 289 29, 30, 31

·     Engine not in operating condition: deceleration fuel cutoff and full load

·     Engine running at idle speed: coolant temperature higher than 40 °C / 104 °F (C 18 XE) or higher than 31 °C / 88 °F (X 20 XEV)

       or

       Engine running in load range: coolant temperature higher than 45 °C / 113 °F (C 18 XE) or higher than 31 °C / 88 °F (X 20 XEV)

·     Oxygen sensor regulation limit "lean" attained for 10 s (mixture constantly lean)

·     Tank vent valve closed

·     Following trouble codes not stored: 61

·     Oxygen sensor heating actuated at 100% for 5.0 s

·     After oxygen sensor heating period has elapsed, oxygen sensor voltage less than 60 mV

       (short circuit to ground or circuit interruption)

·     Above conditions must be fulfilled for at least 5.0 s

 

Effects:

·     The oxygen sensor regulation and tank vent valve regulation are blocked

·     The tank vent valve is regulated to a minimum value

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 26 O2 SENSOR LOOP
-
-
-
-
-

TABLE 2, TROUBLE CODES - Trouble Code 39 O2 SENSOR CIRCUIT VOLTAGE HIGH > < TABLE 2, TROUBLE CODES - Trouble Code 13 O2 SENSOR OPEN CIRCUIT