|
Remove transmission – see operation "Automatic
Transmission, Remove and Install (Vehicles with 4-Cylinder Engine)"
in group "K".
Counterhold drive disc with KM-652 (1) and remove from
crankshaft.
Recut crankshaft thread.
Install
Install drive disc with new bolts to crankshaft –
tightening torque 55 Nm / 41 lbf. ft. + 30° + 15°. Lock
drive disc when tightening with KM-652.
Install automatic transmission – see operation "Automatic
Transmission, Remove and Install (Vehicles with 4-Cylinder Engine)"
in group "K".
|
