|
Note: Only engine
damping blocks from the same manufacturer may be used. The
operation is identical for both left and right engine damping
blocks.
 Remove
Detach engine bracket (1) from engine damping block. Attach
engine to Engine Lifter KM-263-B. Remove engine damping block from
front axle body. Raise engine. Remove engine damping block.
Install
Attach engine damping block to front axle body – ensure
that lug (2) on engine damping block engages in aperture of front
axle body – tightening torque 55 Nm / 40.6 lbf. ft. Attach
engine damping block to engine bracket – tightening torque 40
Nm / 29.5 lbf. ft. Remove Engine Lifter KM-263-B.
|
