Omega B
Checking and adjusting values - 20 SE, X 20 SE
1 ) Correction and checking according to Checking Procedure with TECH2. 2 ) The pressure difference between the individual cylinders should not exceed 100 kPa. |
||||||||||||||||||||||||||||||||||||||||
|
Checking and adjusting values - 20 SE, X 20 SE
1 ) Correction and checking according to Checking Procedure with TECH2. 2 ) The pressure difference between the individual cylinders should not exceed 100 kPa. |
||||||||||||||||||||||||||||||||||||||||
|