|
Starter, Check (Starter Installed)
Test conditions: proper charge state and ground connection of
battery.
Inspect
Check starter cable: proper connection to starter and positive
battery terminal, the highest permissible voltage drop in the cable
during the starting operation is 0.5 volt – measure voltage
at starter terminal "50". For greater voltage drops: check contact
part of ignition lock, selector lever switch and plug connections
for adequate contact.
Check starter: connect Opel Tester – proceed according to
operating instructions.
Note: A short-circuit
test must not be carried out because there is a risk of causing
initial damage to the commutator.
|
