|
Remove drive disc or flywheel – see operation "Drive Disc,
Remove and Install" or "Flywheel, Remove and Install".
Edge out seal ring (1) with suitable tool.
Caution
Do not damage sealing surfaces.
 Clean
Clean sealing surfaces and remove gasket remnants.
Install
Lightly coat sealing lip of seal ring with silicon grease
(white).
Drive in seal ring with KM-635 (2) and KM-535 (3) in cylinder
block.
Install flywheel or drive disc – see operation "Flywheel,
Remove and Install" or "Drive Disc, Remove and Install".
|
