Remove
Glove compartment – see operation
"Glove Compartment, Remove and Install" in group "C". Release
ventilation duct for right nozzle, lightly press ATWS control unit
downwards and remove from bracket, release and detach wiring
harness plug.
1. |
ATWS control unit |
2. |
Wiring harness plug (top illustration)/vent duct
(lower illustration) |
3. |
Instrument panel padding |
4. |
Wiring trough |
5. |
Glove compartment |
6. |
Fan housing |
Install
Wiring harness plug, ATWS control unit, vent duct, glove
compartment.
|
|