ATWS, F0:DATA LIST
from: S86/Ter. 2
to: S86/Ter. 3
(note stamp on switch S86)
No.
TECH 1 Display
Conditions for Checking
Nominal Value
Trouble Codes
Terminal
U/S SWITCH
Interior monitor button not pressed
Interior monitor button pressed
Note:
In the above test, the TECH 1 parameter IMMOBILISATION changes to
ACTIVE 0V.
Despite this, the engine can be started.
This is not a system malfunction.
INACTIVE 12V
ACTIVE 0V
(LED in button flashes)
28
29
Nominal Value:
Cause of Fault:
(If nominal value is not attained)
· Instrument panel wiring harness, short circuit to ground
from: K94/Ter. 29
to: S86/Ter. 2
· Control unit K94 defective
· Instrument panel wiring harness, interruption
from: S86/Ter. 3
to: ground
· Switch S86 defective