Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

PROGRAMMING

COUNTRY CODE

Ignition ON

Press key F7 in the system main menu.

Follow the instructions in TECH 1

Start actuator test

After commencing programming, the country code to be programmed is requested. A selection can be made between the following countries:

·   Europe, except the following countries

·   Great Britain

·   Switzerland

·   The Netherlands

GERMANY

GR. BRITAIN

SWITZERLAND

NETHERLANDS

If the display on the right appears after programming, programming was successful.

PROGRAMMING

COUNTRY CODE

OKAY

If the display on the right appears after programming, a fault has occurred during programming. Carry out the following measures consecutively:

·   Read out trouble codes; there should be no trouble codes stored

·   Repeat programming

·   Carry out TECH 1 self-test

·   Check TECH 1 lead for damaged insulation and shielding

·   Repeat programming with new control unit

PROGRAMMING

COUNTRY CODE

FAULT