Anti - theft Warning System ATWS Quick Check F5: ACTUATOR TEST
TURN SIG. RELAY
Conditions for Checking
Nominal Value
Affected Terminals: 24, 25
Possible Trouble Codes: -
Ignition ON
Press F5 in the system main menu. Follow the instructions in the TECH 1 display.
Start Actuator Test
TECH 1 display:
alternating
INACTIVE
and
ACTIVE
LEFT and RIGHT signal units flash simultaneously
Note:
The turn signal lamps are actuated at a frequency of 0.5 Hz (switch - on time 1 s each).
The test is completed after a maximum of 30 s.