vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

CDLS, F0: DATA LIST - Test Step 05 CO-DR. LOCK SW. > < CDLS, F0: DATA LIST - Test Step 03 DRIVER LOCK SW.

CDLS, F0:DATA LIST

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

04

DRIVER UNLOCK SW

 

Ignition OFF

All doors closed

 

 

 

-

2

 

 

Turn key 30° to the left in driver's door

(unlock central locking)

 

 

CLOSED   0V

 

 

 

 

 

Turn key 30° to the right in driver's door

(lock central locking)

 

 

OPEN    12V

 

 

 

 

 

Turn key 60° to the right in driver's door

(switch on anti-theft device)

 

 

Turn key 30° to the left in driver's door

(unlock central locking)

 

OPEN    12V

 

 

 

Notes on Trouble-shooting:

Nominal Value:

Cause of Fault:

(If nominal value is not attained)

 

·   Release and disconnect wiring harness plug, body and driver's door X11

OPEN   12V

·   Body wiring harness, short circuit to ground

     from:    K37/Ter. 2

     to:         X11/Ter. 1

 

 

·   Control unit K37 defective

 

 

·   Connect wiring harness plug X11/Ter.1 in body wiring harness to ground

CLOSED  0V

·   Body wiring harness, interruption

     from:    K37/Ter. 2

     to:         X11/Ter. 1

 

 

·   Control unit K37 defective

 

 

·   Connect wiring harness plug X11 again

 

 

·   Release and disconnect wiring harness plug from driver's door CDLS switch S41

 

 

·   Connect wiring harness plug S41/Ter. 2 in front door wiring harness to ground

CLOSED  0V

·   Front door wiring harness, interruption

     from:    X11/Ter. 1

     to:         S41/Ter. 2

 

 

If nominal values are attained:

 

·   Switch S41 defective

 

 

 

 

CDLS, F0: DATA LIST - Test Step 05 CO-DR. LOCK SW. > < CDLS, F0: DATA LIST - Test Step 03 DRIVER LOCK SW.