vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F5: ACTUATOR TEST - No. 02 UNLOCK/DEADL. > < F0: DATA LIST - Test Step 20 OVERFLOW PROTEC.

Central Door Locking System CDLS   Quick Check FS: ACTUATOR TEST

 

UNLOCK / LOCK

 

Conditions for Checking

Nominal Value

 

Affected Terminals: 24, 25

Possible Trouble Codes: -

 

Ignition OFF

Electronic immobilizer must be switched off (if necessary, switch off using centre button of infrared key transmitter; only vehicles with infrared remote control)

All doors closed

 

Turn key in driver's door 30° to the left (vehicle with LHD) I right (vehicle with RHD) (central door locking system unlocked and anti - theft warning system switched off)

 

Press F5 in the system main menu, select desired test with the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

 

After YES key is actuated again, the central door locking system can be locked and unlocked using the arrow keys:

arrow key DOWN - > central door locking system locked

 

briefly to LOCK, then again INACTIVE central door locking system locked

arrow key Up - > central door locking system unlocked

 

 

The test is completed after a maximum of 30 s.

 

 

Note:

To avoid excessive heat build - up in the actuators caused by constant actuation, there is a pause after repeated actuations over a short period of time (typically approx. 12 actuations in quick sequence) (TECH 1 parameter OVERFLOW PROTEC. indicates ACTIVE). The control unit function is interrupted during this period of time.

 

briefly to UNLOCK, then again INACTIVE

central door locking

system unlocked

 

 

 

F5: ACTUATOR TEST - No. 02 UNLOCK/DEADL. > < F0: DATA LIST - Test Step 20 OVERFLOW PROTEC.