|
Switch – Front Door Central Locking, Remove
and Install; Switch – Anti-theft Warning System, Remove and
Install
 Remove
Front door inner panelling – see operation "Inner
Panelling – Front Door, Remove and Install" in group "C".
Detach water vapour barrier, release door lock, release wiring
harness plug and detach, unscrew outer handle and remove from
door.
Remove
|
Remove retaining ring (1), contact sensor (2) and retaining
spring (3). Release wiring harness plug (5) and disconnect, remove
switch (4) from outer handle.
Install
Insert switch in outer handle and fasten with retaining spring.
Hook cable into clamp, install contact sensor, attach wiring
harness plug to bracket. Outer handle, door lock, connect wiring
harness plug. Water vapour barrier and front door inner
panelling.
|
|
|
