Instrument Panel Wiring Harness, Lead Routing in
Centre Console
Remove
Centre console – see operation
"Centre Console, Remove and Install" in group "C". Release and
disconnect following wiring harness plugs.
1. |
Switch for drive-off assistance |
2. |
Program switch |
3. |
Automatic transmission gear display |
4. |
Airbag control unit |
|
|
Remove
Remove instrument panel padding together with wiring harness
– see operation "Instrument Panel Padding, Remove and
Install" in group "C". Pull instrument panel wiring harness from
engine compartment into passenger compartment after releasing.
Remove instrument panel padding with wiring harness from
vehicle.
Replace wiring harness by new wiring harness in stages. The
wiring harness plugs in the new wiring harness must be in exactly
the same positions.
Install
Installation in reverse order.
|