If TECH 1 displays WARNING, there is a fault in the low
beam/tail lamp circuit at present. The malfunction is recognised directly
when ignition ON; in operation, a period of 5 s elapses before fault storage.
If TECH 1 displays WARNING, it can be confirmed with the
"R" key in the wash/wipe lever. TECH 1 then displays WARNING QUIT.
The fault is still present.
If TECH 1 displays HISTORY WARNING, there was a fault
in the circuit at a previous point in time. At present however, the low
beam/tail lamp circuit is okay (loose contact). Once the fault is
eliminated, HISTORY WARNING can be
deleted in the TECH 1 mode F4:CLEAR
CODES.
|