Table 2, Trouble Code Table
Trouble Code
Information Sensor Cause of Fault
Remedy F0:DATA LIST No.
Trouble Code Storage when
52
RE-PROGRAM
-
· EEPROM content does not have the correct value
PROGRAM MEMORY
(EEPROM not programmed)
· The fault is set without delay
Effects:
· The initial MID display shows "Program" and in the second contains the alpha code
· The functions "current consumption",
"average consumption", "average speed",
"range" and outside temperature display are blocked.
· Check Control function of MID is switched off
Note:
After successful programming the fault memory is automatically switched off.