|
MID (Multi Info Display)/TID (Triple Info
Display), Remove and Install
 Remove
|
Instrument assembly – see operation "Instrument Assembly,
Remove and Install". MID / TID from instrument assembly – 2
screws.
|
|
Install
Install MID/TID in instrument assembly, instrument assembly.
Note: Only for
replacement: Perform Code Index Programming for new MID/TID with
Tech2 – see corresponding Checking Procedure (B-08 –
Programming). As of MY 2000, perform outside temperature comparison
with Tech2 – see corresponding Checking Procedure (B-07
– additional functions).
|
