|
Reservoir – Screen Wash/Wipe System and
Headlamp High Pressure Washer System, Remove and Install; Residue
Sensor, Remove and Install (up to MY 2000)
|
 Remove
Operations on reservoir for screen wash/wipe system only
analogous.
Remove filler port for residue sensor,
front panelling cover – see operation "Cover – Front
Panelling, Replace" in group "A". Release and detach wiring harness
plug from residue sensor, remove residue sensor, front panelling
member – see operation "Member – Front Panelling,
Remove and Install" in group "A". Release and detach wiring harness
plugs for washer pumps, remove pumps – see operation "Pump
– Screen Wash/Wipe System, Replace and Headlamp High Pressure
Washer System, Replace". Detach hose connections, unscrew reservoir
(4 screws).
| 1. |
Residue sensor |
| 2. |
Windscreen/rear screen washer pump |
| 3. |
Headlamp washer pump |
|
|
Install
Residue sensor, reservoir, pumps, all wiring harness plugs, hose
connections, front panelling member, front panelling cover, filler
port, top up cleaning fluid.
|
