Tailgate Screen Wiper Motor, Remove and
Install
Remove
Remove cover (1) from wiper arm, nut (2) with washer (3), wiper
arm (4), remove lower cover (5), nut (6) with washer (7), rubber
washer (8), cover (8), grommet (9) remains in tailgate.
|
|
Install tailgate inner panelling.
|
|
Remove
Cable tie (1), wiring harness plug (2), wiper motor (3).
Install
Wiper motor with ground cable – ensure that grommet is
correctly seated, wiring harness plug, cable tie, tailgate
panelling, panel, washer with nut, lower cover, screen wiper arm,
washer with nut, cover.
|
|
|