Vauxhall Workshop Service and Repair Manuals

No.

TECH 1 Display

Conditions for Checking

Nominal Value

Trouble Codes

Terminal

4

CO-DR. MIR. V.

Ignition ON

Press key F5 in the system main menu, select the desired test with the arrow keys and confirm with YES. Follow the instructions in the TECH 1 display.

20

4, 5, 7, 13, 26

(26-pin plug)

When the YES key is actuated again, the co-driver's mirror can be moved to the two end stops using the arrow keys. After an arrow key is pressed, the co-driver's mirror is moved in the corresponding direction (arrow key UP -> up; arrow key DOWN -> down).

The value displayed alters continually within the specified range depending on the programmed end stops.

13 %       0.14 V

to

94 %       4.67 V

Co-driver's mirror moves in vertical direction

Notes on Trouble-shooting:

Nominal Value:

Cause of fault:

(If nominal value is not attained)

·   Carry out test steps 29 and 30 in F0:DATA LIST