Vauxhall Workshop Service and Repair Manuals

Test

Test

Check

Notes

Nominal

Step

Equipment

Value

Multimeter

of

between

MKM-587-A

4

Voltmeter, range 20 V, DC

Actuation of motors in driver's outside mirror

9-pin wiring harness coup- ling/

9-pin wiring harness coup- ling/

·   Reconnect wiring harness connection between mirror adjustment switch and driver's door wiring harness

·   Install mirror adjustment switch again

·   Remove driver's outside mirror

·   Release wiring harness connection for driver's outside mirror/ driver's door wiring harness and disconnect

·   Measurement at wiring harness coupling

·   Outside mirror switch for driver/ co-driver set to driver

Ter. 1

Ter. 3

·   Press outside mirror vertical/ horizontal rocker switch upwards and then downwards

higher than 10 V polarity changes

9-pin wiring harness coup- ling/

9-pin wiring harness coup- ling/

Ter. 2

Ter. 3

·   Press outside mirror vertical/ horizontal rocker switch to right and then to left

higher than 10 V polarity changes

Possible Fault:

(If nominal value is not attained)

1.  Lead interruption between mirror adjustment switch S68 and wiring harness connection for driver's outside mirror/ driver's door wiring harness

2.  Lead short circuit between S68 and wiring harness connection for driver's outside mirror/ driver's door wiring harness