B Pillar, Replace (Models F35, F19, F68)
 Remove, Disconnect Attaching parts. Front door, rear door, seats. Separate B-pillar away from seat belt reinforcement. Observe size of new part!
 Install, Connect Fit B-pillar. Prepare flanges, apply spot weld paint. Weld in new part. Seal cavities. Attaching parts.
 Important! Butt weld seams lie outside of B-pillar reinforcement. | 
|
Important! B-pillar is supplied with tack-welded door hinges. Hang rear doors in hinges and adjust door gap according to dimensional specifications. Door gap differs from door shell to complete door. Door shell installed without door weatherstrip.
|
Position |
Door shell |
Complete door |
Tolerance |
|
2 - 2 |
4 |
5 |
± 1 |
|
3 - 3 |
4 |
5 |
± 1 |
All dimensions in mm.
Install, Connect Weld in hinges (1). Seal welding seams (2). Seal cavities. Attaching parts. | 
|
|
