Rear End Panel - Upper, Replace (Model F19) Additional operation to "Rear Quarter Panel - Inner Rear, (Partial Replacement) Replace (Model F19)"
Remove, Disconnect Attaching parts. Separate and drill off upper rear end panel.
Install, Connect Fit rear end panel, prepare flanges, apply spot weld paint. Weld in new part, seal body seams, seal cavities. Attaching parts.
Important! For some countries, anchoring points for child seats are fitted at the factory in the upper rear end panel. These anchoring points are not available individually and for safety reasons may only be replaced in conjunction with the upper rear end panel. |
|
|