Rear Frame, Replace (Models F35, F19, F68) Additional operation to "Floor - Rear, Replace (Model F35, F19, F68)"
 Remove, Disconnect Attaching parts. Separate rear frame according to specifications. Note size of new part. Separate rest of bracket on inside of original part.
 Install, Connect Prepare and fit rear frame. Chamfer parts at welding point - see operations "Front Frame (Partial Replacement "Long" and "Short"), Replace (Models F35, F19, F68)". Butt-weld seam must not be smoothed. Apply spot weld paint. Weld in new part (butt weld inner reinforcement first, then butt weld outer rear frame). Seal cavities. Apply underseal. Attaching parts.
|
Separation cut: |
|
1 = |
Models F19, F68 |
|
2 = |
Model F35 |
| 
|
|
