Roof Frame - Rear, Replace (Model F35) Additional operation to "Roof, Replace (Model F35)"
Remove, Disconnect Attaching parts. Drill off roof frame.
Install, Connect Fit roof frame. Apply spot weld paint. Weld in new parts. Seal cavities. Notice:
1 |
Rear roof frame with reinforcement, tailgate hinge bearing |
2 |
Reinforcement, roof frame, inner (D-pillars) |
|
|
Important! For some countries, anchoring points for child seats are fitted at the factory in the rear roof frame. These anchoring points are not available individually and for safety reasons may only be replaced in conjunction with the rear roof frame.
1 |
Rear roof frame |
2 |
Connector to child retaining system |
3 |
Spacers |
4 |
Anchorage |
5 |
Retaining ring |
6 |
Bolt |
|
|
|