Rear Quarter Panel - Inner, Replace (Model F35) Additional operation to "Body Rear Quarter Panel, Replace", "Roof, Replace (Model F35)" The Aftersales department supplies the following economy parts for universal application.
|
1 |
Rear quarter panel, inner front |
|
1.1 |
Separation line for rear quarter panel, inner front, lower |
|
2 |
Rear quarter panel, inner |
|
2.1 |
Separation line for rear quarter panel, inner, lower |
|
3 |
Rear inner rear quarter panel |
|
3.1 |
Separation line for rear quarter panel, rear lower |
| 
|
Notice: Separation line of B-pillar and C-pillar above seat belt reinforcement.
 Remove, Disconnect Attaching parts, separate rear quarter panel - drill off. Note sizes.
 Install, Connect Fit inner, rear quarter panel. Prepare flanges. Apply spot weld paint. Weld in new part. Apply underseal. Attaching parts. Notice: Section I shows welding operations seen from the interior. |
|
|
