Wheel Well, Replace Completely (Models F35, F19, F68)
Additional operation to "Front - Upper, Replace Completely (Models F35, F19, F68)".
Remove, Disconnect
Attaching parts.
Drill off wheel well: Detach front frame in area of bulkhead (2), leave remaining flange in front of bulkhead.
Separate plenum chamber at separation point 1. Remove remaining sheet metal.
Observe size of new part!
Install, Connect
Prepare and fit wheel well - use body straightening bench. Prepare flanges. Apply spot weld paint.
Weld in wheel well. Seal body seams. Seal cavities. Apply underseal. Attaching parts.