E1 - Remove contour foil, clamp |
• |
Remove contour foil and clamp. |
|
|
E2 - Sand visible area |
• |
Sand visible damaged area generously with hand sander (P 80), following outer contours; if necessary also sand by hand (emery paper). |
• |
Use P 240 to P 400 for fine sanding and finishing the contours. |
|
|
E3 - Apply structure spray |
Only for unpainted surfaces. |
• |
Mask painted surfaces. |
• |
Clean unpainted surfaces with cleaner from adhesive set or silicone remover. |
• |
Apply structure spray to unpainted surfaces; if necessary, apply structure spray onto complete surface to avoid different colour hues. |
|
|
E4 - Carry out paint repairs |
Only for painted surfaces. |
• |
Carry out paint repairs. |
|
|
Cross section of repair damage. |
|
|
1 |
Fibrous web embedded in adhesive |
2 |
Adhesive in concealed area |
3 |
Adhesive in visible area |
4 |
Contour foil |
5 |
Structure spray or, optionally, paint coat |