Lettering, Protective Trim Strips, Adhesive Foil Lettering, Replace - Models F19, F68 (up to MY '99) Dimensional specifications apply to Opel, Vauxhall and Holden (all dimensions in mm).
Remove, Disconnect Heat lettering with hot air dryer and detach, clean adhesive area with benzene or silicon remover.
Install, Connect Extend lower edge of luggage compartment lid outside handle (1) with paper masking tape (2). Position and adhere lettering according to dimensional specifications.
Important! After adhesion of lettering, remove paper masking tape. |
|
|