Vauxhall Workshop Service and Repair Manuals

Lettering, Replace - Models F19, F68 (as of MY '99)  

Dimensional specifications apply to Opel, Vauxhall and Holden (all dimensions in mm).     Remove, Disconnect    Heat lettering with hot air dryer and detach, clean adhesive area with benzene or silicon remover.     Install, Connect    Extend visible edge beyond the lower edge of the luggage compartment lid outside handle (1) with paper masking tape (2). Position lettering according to dimensional specifications and adhere.     Important!    After adhesion of lettering, remove paper masking tape.