Install, Connect
• Trim paint stripes as shown in illustration (I).
• Detach protective paper (adhesive face) and moisten adhesive face of paint stripe with water (3 drops of detergent to 1 litre of tap water).
• Position Paint Stripes Starting at Seal (Arrow).
• Fit paint stripes with spatula (eliminate creasing and air bubbles) and fold over at the flange edges.
• Detach protective paper (transportation protection).
• Attach C-pillar door seal.
Notice: Only process paint stripes at temperatures exceeding 18 ° C. Dry paint stripes with hot air drier (maximum 60 ° C) for approx. 2 minutes to ensure optimal adhesion. Puncture any bubbles with needle and smooth away with spatula. |