Seat Belt - Rear Side, Remove and Install
 Remove, Disconnect
|
Detach rear door weatherstrip, rear seat backrest - see operation "Rear Seat Backrest, Remove and Install". |
|
Retaining clamp for rear seat backrest, |
|
load compartment cover - Models F35, F68. |
|
Release rear quarter panel inner panelling - Model F35. Remove rear quarter panel inner panelling - see operation "Inner Panelling - Rear Quarter Panel, Remove and Install - Model F35". |
|
Guide clamp cover, |
|
reel retractor (3), |
|
thread seat belt out of rear quarter panel inner panelling - Model F19. |
|
Loosen sill inner panelling. |
|
Lower belt mount (4), |
|
height adjuster (2), |
|
belt lock (1), |
|
guide clamp (2). |
| 
|
 Install, Connect
|
reel retractor (3), |
|
belt lock (1), |
|
height adjuster (2), |
|
Lower belt mount (4), |
|
guide clamp (2). |
|
Sill inner panelling |
|
Thread seat belt into C-pillar inner panelling - Model F19 |
|
Guide clamp cover, |
|
Rear quarter panel inner panelling |
|
Load compartment cover |
|
Retaining clamp for rear seat backrest |
|
Rear seat backrest |
|
|
 Tighten (Torque)
|
Height adjuster to C-pillar |
20 Nm / 15 lbf. ft. |
|
Reel retractor to C-pillar |
35 Nm / 26 lbf. ft. |
|
Belt lock to underbody |
35 Nm / 26 lbf. ft. |
|
Lower belt fastening |
35 Nm / 26 lbf. ft. |
|
