Moulded Headlining, Remove and Install
 Remove, Disconnect Sun visors (4), bracket (5), reading lamp, with optional equipment "sliding roof" - detach moulding (2), remove control unit cover or as of MY '99 storage compartment (1). A-pillar inner panelling, B-pillar inner panelling, C-pillar inner panelling, C/D-pillar inner panelling - Models F35, F19 or F68 - see operation "Inner Panelling - C/D-pillar, Remove and Install - Model F35", "Inner Panelling - C/D-Pillar, Remove and Install - Model F19" or "Inner Panelling - C/D-Pillar, Remove and Install - Model F68". Upper assist handle (3), disconnect plug connections; remove upper front and rear door weatherstrip. Remove centre brake lamp (Model F19, F68 as of MY '99). Roof frame inner panelling, load compartment interior lamp, fixtures for luggage retaining net, as of MY 2000 release mounting point for ribbon wiring harness, moulded headlining. | 
|
Notice: When installing new moulded headlining, holes must be cut for the assist handles (3) at the marked points. Observe cutouts for LHD and RHD!
 Install, Connect Moulded headlining, as of MY 2000 install ribbon wiring harness, front and rear door weatherstrip, plug connections, upper assist handles, inner panelling, control unit cover or storage compartment, moulding, reading lamps, load compartment interior lamp, bracket for luggage retaining net, bracket, sun visor, centre brake lamp (Models F19, F68 as of MY '99). |
|
|
