Remove right footwell air duct - see corresponding operation. Remove glove compartment - see operation "Glove Compartment, Remove and Install" in group "C". Release and remove wiring harness plug (1). Remove servomotor air flap, defrosting (2) (2 bolts, arrows).
 Install, Connect Install servo motor for air flap, install defroster. Connect wiring harness plug. Install right footwell air duct - see corresponding operation. Install glove compartment - see operation "Glove Compartment, Remove and Install" in group "C".
 Adjust Synchronise servomotors: Ignition ON, push AUTO and OFF buttons simultaneously for more than 5 seconds. | 
Remove, Disconnect 