vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Damping Bushing in Trailing Link - Rear/Upper and Rear/Lower, Replace replacement > < Damping Bushing - Crossmember, Replace Replace

 

Upper Control Arm and/or Damping Bushing, Remove and Install  

Object Number: 616191  Size: DEFAULT  Remove, Disconnect   

Remove rear wheel.  

Remove locking plate (1) - release fastening bolts (2) and unscrew.  

Remove upper control arm.  

Clamp control arm in vice with protective jaws.  

Object Number: 616193  Size: DEFAULT  Disassemble   

Pull damping bushing out of control arm with KM-906-70 (5), KM-906-31 (3) and KM-906-32 (4) in conjunction with KM-906-34 (6).  

Object Number: 2395530  Size: DEFAULT

 

 

Object Number: 616194  Size: DEFAULT  Assemble   

Carefully pull damping bushing (2) into control arm with KM-906-70 (5), KM-906-33 (1), KM-906-34 (3) and KM-906-32 (4).  

Object Number: 616192  Size: DEFAULT  Install, Connect   

Attach upper control arm with new fastening bolt and new fastening nut to trailing link and crossmember - loosely tighten screw connection.  

Attach rear wheel.  

Lower vehicle and tighten screw connections for upper control arm to crossmember and trailing link. Fasten screw connection for upper control arm to trailing link with new locking plate.  

Object Number: 616200  Size: DEFAULT  Torque - Angle Method   

Wheel to wheel hub - 110 Nm / 81 lbf. ft.  

Upper control arm to crossmember and trailing link - 90 Nm / 66 lbf. ft. + 75 ° + 15 ° .  

Object Number: 616196  Size: DEFAULT  Inspect   

Check toe-in and adjust if necessary - see operation "Rear Axle Toe-in, Check / Correct" in group "E".  

Object Number: 2391880  Size: DEFAULT

 

 


Related Literature Units
-

Damping Bushing in Trailing Link - Rear/Upper and Rear/Lower, Replace replacement > < Damping Bushing - Crossmember, Replace Replace