Vauxhall Workshop Service and Repair Manuals

Recommended Torque Values (Group F)  

	Nm
Fastening nut to shock absorbers	20 1)
Brake line to brake hose	16
Spring strut to trailing link	150 + 30 ° + 15 ° 2)
Spring strut to wheel well	55
Trailing link bracket to chassis	90 + 30 ° + 15 ° 2)
Trailing link bracket to trailing link	90 + 60 ° + 15 ° 1) 2)
Upper control arm to trailing link	90 + 60 ° + 15 ° 1) 2) 3)
Upper control arm to crossmember	90 + 60 ° + 15 ° 1) 2) 3)
Lower control arm to trailing link	90 + 60 ° + 15 ° 1) 2) 3)
Lower control arm to crossmember	90 + 60 ° + 15 ° 1) 2) 3)

1)  Use new fastening nut(s).  

2)  Use new fastening bolt(s).  

3)  Tightening to correct torque is carried out under vehicle load.  

Recommended Torque Values (Continued)  

	Nm
Crossmember to chassis	90 + 60 ° + 15 ° 1) 2)
Wheel to wheel hub	110
Wheel bearing unit to trailing link	50 + 30 ° + 15 ° 3)
Stabiliser (pendulum) to trailing link	55
Stabiliser to crossmember	55

1)  Use new fastening bolt(s).  

2)  Installation and removal with to impact screwdriver is not permitted.  

3)  Use new fastening nut(s).