Remove brake disc or brake drum - see operation "Brake Disc, Rear Wheel Brake, Remove and Install" or "Brake Drum, Remove and Install" in group "H". Release wiring harness plug (1) for wheel speed sensor and disconnect. Unscrew fastening nuts (2) and remove wheel bearing unit.
 Install, Connect Attach wheel bearing unit with new fastening nuts to trailing link. Clip on wiring harness plug for wheel speed sensor. Install brake disc or brake drum - see operation "Brake Disc - Rear Wheel Brake, Remove and Install" or "Brake Drum, Remove and Install" in group "H".
 Torque - Angle Method Wheel bearing unit to trailing link - 50 Nm / 37 lbf. ft. + 30 ° + 15 ° . | 
Remove, Disconnect 