Auxiliary Fan Motor, Remove and Install (X 20 DTH)
Remove, Disconnect
Remove lower engine compartment cover.
Remove radiator grille and front panelling - see operation "Front Panelling, Remove and Install" in group "A".
Disconnect wiring harness plug for auxiliary fan (see enlargement) and remove wiring harness from auxiliary fan housing.
Unclip power steering cooling coil (1) from brackets (2) on auxiliary fan housing.
Remove fastening bolts (arrows) and carefully remove auxiliary fan housing downwards.
For vehicles with air conditioning: Attach condenser to front member.
Important!
Do not bend refrigerant lines (1).
Unscrew fastening bolts (arrows) and remove auxiliary fan motor together with fan wheel.
Install, Connect
Mount auxiliary fan motor on auxiliary fan housing together with fan wheel.
Carefully insert auxiliary fan housing from below and attach to radiator together with condenser (if fitted).
Clip power steering coolant coil in auxiliary fan housing bracket.
Connect wiring harness plug for auxiliary fan and fasten wiring harness in fan housing.
Attach radiator grille and front panelling - see operation "Front Panelling, Remove and Install" in group "A".
Install lower engine compartment cover.
Remove, Disconnect 
Important! 
Install, Connect 