Dynamic Oil Level Control Sensor, Remove and Install
Remove, Disconnect
Remove oil pan - see operation "Oil Pan, Remove and Install".
Remove retaining ring (1) using suitable tool and press connection of dynamic oil level control sensor out of oil pan.
Remove dynamic oil level control sensor (2).
Install, Connect
Attach dynamic oil level control sensor to oil pan - tightening torque 8 Nm / 6 lbf. ft.
Insert dynamic oil level control sensor connection with new seal ring in oil pan and fasten with snap ring.
Install oil pan - see operation "Oil Pan, Remove and Install".
Remove, Disconnect 
Install, Connect 