vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Coolant Flange - Cylinder Block, Remove and Install > < Dynamic Oil Level Control Sensor, Remove and Install

Vectra B

 

Oil Temperature Sensor, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove lower engine compartment cover.  

Remove oil drain bolt - collect escaping engine oil.  

Disconnect wiring harness plug (1) from oil temperature sensor.  

Disconnect oil temperature sensor (2) from oil pan.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach oil temperature sensor to oil pan with new seal ring - tightening torque 18 Nm / 13.5 lbf. ft.  

Connect wiring harness plug to oil temperature sensor.  

Install oil drain bolt with new seal ring - tightening torque 10 Nm / 7.5 lbf. ft.  

Install lower engine compartment cover.  

Fill with prescribed oil quantity.  

Object Number: 2396054 Size: DEFAULT

 

 

Coolant Flange - Cylinder Block, Remove and Install > < Dynamic Oil Level Control Sensor, Remove and Install