Attach crankshaft pulse pick-up with new seal ring to cylinder block - tightening torque 6 Nm / 4 lbf. ft. Insert crankshaft pulse pick-up cable (1) in rear toothed belt cover - note cable routing. Version without air conditioning: attach engine damping block bracket to cylinder block - 60 Nm / 44 lbf. ft. Install front right engine damping block - see operation "Engine Damping Block, Front, Remove and Install". Version with air conditioning: Install auxiliary component bracket - see operation "Auxiliary Component Bracket, Remove and Install (with Air Conditioning)". Connect wiring harness plug for crankshaft pulse pickup. Install front toothed belt cover - see operation "Front Toothed Belt Cover, Remove and Install (16 LZ2 and 20 NEJ)". |