vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Knocking Sensor > < Injectors, Remove and Install reinstallation

Vectra B

 

Crankshaft Pulse Pick-up, Remove and Install (X 25 XE)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect covers (3 units) above air deflector panel.  

Disconnect wiring harness plug (1) of crankshaft pulse pick-up.  

Lay crankshaft pulse pick-up out of the way - note cable routing.  

Detach crankshaft pulse pick-up (2) from cylinder block and remove.  

Object Number: 2392876 Size: DEFAULT

 

 

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach crankshaft pulse pick-up to cylinder block with new seal ring - tightening torque 8 Nm / 6 lbf. ft.  

Note cable routing. Fasten cable (1) with cable straps (2) and clips (3).  

Connect wiring harness plug of crankshaft pulse pick-up.  

Connect covers (3 units) above air deflector panel.  

Object Number: 2396110 Size: DEFAULT

 

 

Knocking Sensor > < Injectors, Remove and Install reinstallation