vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Wiring Harness > < Ignition Module, Remove and Install (16 LZ2)

Vectra B

 

Ignition Coil, Remove and Install (16 LZ2)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Disconnect wiring harness plug (1) and high voltage ignition cable (2) from ignition coil. Disconnect wiring harness plug (3) from ignition module.  

Remove ignition coil together with heatsink from bracket at wheel well (arrows).  

Push ignition coil out of cooling plate.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Slide ignition coil into heat sink.  

Attach ignition coil together with heatsink to bracket at wheel well. Connect both wiring harness plugs to ignition module.  

Connect high-voltage ignition cable to ignition coil.  

Object Number: 2392682 Size: DEFAULT

 

 

Wiring Harness > < Ignition Module, Remove and Install (16 LZ2)