vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Gasket - Rear Camshaft Housing, Replace (20 NEJ) > < Camshaft Housing Seal Ring - Cylinder Head - Rear, Replace (X 16 SZR)

Vectra B

 

Seal Ring - Rear Camshaft Housing, Replace (16 LZ2)  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Remove high voltage distributor (1) - see operation "High Voltage Distributor, Remove and Install (16 LZ2)".  

Edge out seal ring (2) with suitable tool.  

Object Number: 616201 Size: DEFAULT  Important!   

Do not damage camshaft housing.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Lightly coat sealing lip of new seal ring with silicone grease (white). Press new seal ring with KM-636 (3) into camshaft housing.  

Install high-voltage distributor - see operation "High-Voltage Distributor, Remove and Install (16 LZ2)".  

Object Number: 2392576 Size: DEFAULT

 

 
Related Literature Units
-

Gasket - Rear Camshaft Housing, Replace (20 NEJ) > < Camshaft Housing Seal Ring - Cylinder Head - Rear, Replace (X 16 SZR)