Checking and Adjustment Values (X 16 SZR, 16LZ2, 20 NEJ)
Engine |
|
X 16 SZR, 16 LZ2, 20 NEJ |
Valve clearance |
|
Hydraulic valve lash adjustment: no adjustment necessary |
Compression pressure |
kPa (bar) |
1200 to 1500 (12 to 15) The pressure difference between the individual cylinders in the entire engine should not exceed 100 kPa (1 bar). |
Pressure loss check |
|
Pressure loss per cylinder with engine in perfect condition must not be more than 25% |
Checking and Adjustment Values (Continued)
Engine |
|
X 16 SZR, 16 LZ2 |
20 NEJ |
Idle speed |
|
|
|
|
Manual transmission |
rpm |
770 to 930 1) |
670 to 1030 1) |
|
Automatic transmission |
rpm |
720 |
670 to 1030 1) |
Ignition timing at idle speed |
|
1) |
1) |
CO content |
Vol. % |
1) |
0.5 to 1.0 1) |
1) Correction and adjustment via TECH 2 in accordance with checking instructions. When checking the idle speed and the CO content, ensure the following:
- Electrical consumers switched off
- Engine at operating temperature (oil temperature ≥ 80 ° C).
- Selector lever in position "P" with automatic transmission
- CO test with 2,800 to 3,200 rpm without load
|