vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Idle Speed Adjuster, Remove and Install > < Crankshaft Pulse Pick-up, Remove and Install

Vectra B

 

Knock Sensor, Remove and Install  

Object Number: 616191 Size: DEFAULT  Remove, Disconnect   

Detach wiring harness plug (1) from knock sensor (2). Remove knock sensor from cylinder block.  

Object Number: 616201 Size: DEFAULT  Important!   

The knock sensor must lie on the entire contact face directly on the cylinder block - ensure it is completely clean. Do not use underlying, spring or toothed lock washer. Observe tightening torque without fail, otherwise function disruptions may occur.  

Object Number: 616192 Size: DEFAULT  Install, Connect   

Attach knock sensor to cylinder block - tightening torque 20 Nm / 15 lbf. ft.  

Connect wiring harness plug to knock sensor.  

Object Number: 2392643 Size: DEFAULT

 

 

Idle Speed Adjuster, Remove and Install > < Crankshaft Pulse Pick-up, Remove and Install