Remove throttle valve injection housing - see operation "Throttle Valve Injection Housing, Remove and Install". Remove fastening bolts (arrows) and remove upper part of throttle valve injection housing.
Clean Remove sealant remnants and clean sealing surfaces and - ensure utmost cleanliness.
Install, Connect When replacing upper part of throttle valve injection housing: transfer injector, fuel connection and fuel pressure regulator. Attach upper part of throttle valve injection housing with new gasket to throttle valve injection housing - insert bolts with screw locking compound (red) - tightening torque 6 Nm / 4 lbf. ft. 1) . Install throttle valve injection housing - see operation "Throttle Valve Injection Housing, Remove and Install". |